强奸女警,网红洋大葱喷血视频,91麻豆传媒swag在线

Self-priming long tube respirator

EXECUTIVE STANDARD: GB6220-2009

1 Overview
The HAT-ZX type (self-priming type long tube air breathing apparatus) is a safety protection device that protects the human body by inhaling filtered atmospheric air by human lung force. Suitable for use in atmospheric environments with heavy smoke, oxygen and dust pollution.
 
The HAT-ZX self-priming long-tube air respirator is a protective device that the wearer uses the lungs to inhale clean air through the breathing hose to ensure safe breathing.


2 COMPONENT

The HAT-ZX self-priming long tube air respirator consists of a 10M long corrugated hose, a mask and an air intake filter.

3 INSTRUCTIONS FOE USE

When wearing, firstly, place the long tube inlet end in a clean atmosphere, and the other end is connected to the mask inlet (tightly) 0.6m away from the mask, and fix the hose on the belt so as not to hinder the free movement of the body. When wearing the mask, wear it from the chin, and then adjust the headband properly. The mask should be in close contact with the face to ensure no air leaks. Then Operators can enter the work area.

4 MAINTENANCE

After using the mask, wipe off all parts of the sweat and dirt, especially the lens and the expiratory valve. The inhalation valve should be kept clean.
If used in a virus environment with infectious nature, the mask can be wiped, cleaned and disinfected with 1% peracetic acid disinfectant. If necessary, the mask can be soaked in the acetic acid disinfectant. After the mask is disinfected, wipe it with water and dry it. .

  • Product model: Self-priming long tube respirator


EXECUTIVE STANDARD: GB6220-2009

1 Overview
The HAT-ZX type (self-priming type long tube air breathing apparatus) is a safety protection device that protects the human body by inhaling filtered atmospheric air by human lung force. Suitable for use in atmospheric environments with heavy smoke, oxygen and dust pollution.
 
The HAT-ZX self-priming long-tube air respirator is a protective device that the wearer uses the lungs to inhale clean air through the breathing hose to ensure safe breathing.


2 COMPONENT

The HAT-ZX self-priming long tube air respirator consists of a 10M long corrugated hose, a mask and an air intake filter.

3 INSTRUCTIONS FOE USE

When wearing, firstly, place the long tube inlet end in a clean atmosphere, and the other end is connected to the mask inlet (tightly) 0.6m away from the mask, and fix the hose on the belt so as not to hinder the free movement of the body. When wearing the mask, wear it from the chin, and then adjust the headband properly. The mask should be in close contact with the face to ensure no air leaks. Then Operators can enter the work area.

4 MAINTENANCE

After using the mask, wipe off all parts of the sweat and dirt, especially the lens and the expiratory valve. The inhalation valve should be kept clean.
If used in a virus environment with infectious nature, the mask can be wiped, cleaned and disinfected with 1% peracetic acid disinfectant. If necessary, the mask can be soaked in the acetic acid disinfectant. After the mask is disinfected, wipe it with water and dry it. .

◆The long tube used is a food grade rubber cloth corrugated tube or plastic tube. It has no harmful materials and is safer. It has good heat resistance and cold resistance, good chemical stability, high rigidity and toughness, and good mechanical strength. Dielectric properties and environmental pressure crack resistance are also good.
◆The mask has a wide field of view, strong anti-oxidation ability, anti-friction, anti-fog and anti-glare treatment on both sides. Good sealing.
◆ Oil mist penetration rate: ≤0.005%
◆Exhalation resistance: ≤98Pa

◆Inspiratory resistance: ≤250Pa
◆Field of view:≥85%
◆Long tube size: 10~20m 
◆Number of users: Single
◆ Protection time: None Restriction
◆ Long tube material: food grade PE polyethylene bellows


  • Characteristics and usage of long tube respirator hose

    BROWSE
  • Method of use for self-priming long tube respirators

    BROWSE